Submersible sludge pumps XJS 25 80 are ideal for pumping sludge and water mixed with solids. When delivered to a site you can start using them right away. Pumps with built in AquaTronic unit will always have correct direction of impeller rotation, ensuring peak performance and reduced wear.
Download: Submersible Dewatering Pumps
- Plug-and-pump installation
Plug in without worrying about overheating. Built-in contactor and thermal sensors protects the motor from overheating. Pumps with a built-in AquaTronic unit will electronically adjust for incorrect phase order, ensuring correct impeller rotation.
- Reliable and trouble-free operation
Equipped with a free flow vortex impeller and a pump volute, the XJS is perfect for pumping sludge and water mixed with solids. The pump design, robust construction and premium materials ensure high wear resistance. The impeller is available in different sizes to meet your specific requirement. Min impeller diameter for duty with low water level or intermittent dry running. Max impeller diameter requires half motor or more submersed for continuous duty. (Pump can operate lying down)
The modular design of the pump range saves cost by ensuring maximum pump availability with a smaller spare parts inventory.The condition of a pump with a built-in AquaTronic unit can rapidly be checked without disassembly, using its service software.
- Saves energy and the environment
The high-efficiency motor and hydraulics are combined with low friction bearings to reduce power losses. You achieve low total energy costs and minimize your carbon footprint. Environmentally safe white oil is used in the oil casing for easy inspection of seal conditions.
Cut-through of XJS
XJS 80 Curve 60Hz
ABS Submersible Drainage Pump XJS 80 60Hz
|XJS 80 D -160 3-phase|
|XJS 80 D -160 AT* 3-phase|
|XJS 80 D -175 3-phase|
|XJS 80 D -175 AT* 3-phase|
|Weight: 64 kg|
*AquaTronic: Built in electronic pump control.
|Protection class||IP 68|
|Max. temperature of pumped medium at max. power input and continuous duty||40ºC|
|Max. medium density||1.100 kg/m3|
|pH of the pumped medium||5-8|
|Free passage||48 x 60 mm|
|Max number of starts||30/hour|
|Motor rating P2||9.8 kW|
|Power cable||20 m type S1BN8-F|
Starting Method and Motor Protection
XJS 80 AT: Direct on line start (DOL 575 V) with built in AquaTronic unit, which automatically adjusts phase order by dual contactors, ensuring correct motor rotation.
Soft start (230-460 V) is built in with the AquaTronic unit, where three thyristors reduces start current to three times the nominal current. Here two relays ensure correct motor rotation.
The AquaTronic unit monitors motor temperature, by use of NTC thermistors built into stator windings, and stops the motor at high temperature. It will also stop the motor at high amperage or if a phase is missing.
XJS 80: Direct on line start with built in contactor. Pumps to be used with VFD must have terminal block instead of contactor. Thermal switches (140 ºC, ±5) built into the stator windings are connected to the contactor and stops the pump at high temperature.
|2 1/2, 3 (standard), 4 hose connections|
|2 1/2, 3, 4 G/B.S.P. threaded connections|
|2 1/2, 3, 4 NTP threaded connections|
Learn more about this product on the Sulzer ABS website here: