Submersible Sludge Pump Type ABS XJS 25 - 60Hz US

Submersible sludge pumps XJS 25 80 are ideal for pumping sludge and water mixed with solids. When delivered to a site you can start using them right away. Pumps with built in AquaTronic unit will always have correct direction of impeller rotation, ensuring peak performance and reduced wear.

SKU: 18454 Categories: pumps, submersible-dewatering-pumps, submersible-pumps, submersible-sludge-pump, Sulzer ABS Tag: sulzer-abs

Description

Description

Supporting Documents:
Download: Submersible Dewatering Pumps

Information

Main benefits

Plug-and-pump installation
Plug in without worrying about overheating. Built-in contactor and thermal sensors protects the motor from overheating. Pumps with a built-in AquaTronic unit will electronically adjust for incorrect phase order, ensuring correct impeller rotation.
Reliable and trouble-free operation
Equipped with a free flow vortex impeller and a pump volute, the XJS is perfect for pumping sludge and water mixed with solids. The pump design, robust construction and premium materials ensure high wear resistance. The impeller is available in different sizes to meet your specific requirement. Min impeller diameter for duty with low water level or intermittent dry running. Max impeller diameter requires half motor or more submersed for continuous duty. (Pump can operate lying down)
Serviceability
The modular design of the pump range saves cost by ensuring maximum pump availability with a smaller spare parts inventory. The condition of a pump with a built-in AquaTronic unit can rapidly be checked without disassembly, using its service software.
Saves energy and the environmentThe high-efficiency motor and hydraulics are combined with low friction bearings to reduce power losses. You achieve low total energy costs and minimize your carbon footprint. Environmentally safe white oil is used in the oil casing for easy inspection of seal conditions.

Click to zoom

Cut-through of XJS

XJS 25 Curve 60Hz US

Product information

ABS Submersible Drainage Pump XJS 25 60Hz US

Models

XJS 25 D – 118 3-phase

XJS 25 D – 118 AT* 3-phase

XJS 25 D -128 3-phase

XJS 25 D – 128 AT* 3-phase

Weight: 86 lbs

*AquaTronic: Built in electronic pump control.

Specification

Electric submersible pump

Maximum submergence	65 ft
Protection class	IP 68
Max. temperature of pumped medium at max. power input and continuous duty	104ºF
Max. medium density	0.0397 lbs/inch³
pH of the pumped medium	5-8
Strainer hole	2 3/16″ x 1 3/4″
Max number of starts	30/hour
Motor rating P₂	4 Hp
Speed	3500 rpm
Power cable	65 ft type AWG

Starting Method and Motor Protection

XJS 25 AT: Direct on line start (DOL 230-575 V) with built in AquaTronic unit, which automatically adjusts phase order by dual contactors, ensuring correct motor rotation.
The AquaTronic unit monitors motor temperature, by use of NTC thermistors built into stator windings, and stops the motor at high temperature. It will also stop the motor at high amperage or if a phase is missing.

XJS 25: Direct on line start with built in contactor. Pumps to be used with VFD must have terminal block instead of contactor. Thermal switches (284 ºF, ±5) built into the stator windings are connected to the contactor and stops the pump at high temperature.