The HPK armoured pump range, with elastic lining made of HAWIFLEX® or rubber, metal or mineral casting, is preferably used for abrasive/corrosive media with a maximum grain size of 5 mm.
Description
Supporting Documents:
Download: Characteristic curve_HPK.pdf
| Horizontal armoured pump of the type HPK |
|
The HPK armoured pump range, with elastic lining made of HAWIFLEX® or rubber, metal or mineral casting, is preferably used for abrasive/corrosive media with a maximum grain size of 5 mm.
Construction and materials Single-stage armoured pumps with easily replaceable wearing parts, re-adjustable suction gap. The wear plates are bolted to a metallic outer housing, while the casing liner is inserted loosely. The impeller is taken up by the shaft by means of a trapezoidal thread. Our HAWIFLEX® material is poured on to the metal core of the impeller and wear plates. The casing liner consists entirely of our HAWIFLEX® material. All wear parts that come into contact with media are therefore protected by our HAWIFLEX® material. HAWIFLEX® materials have been produced in their own plastics foundry since 1967. Additional details of the material are available on request; the combination of elastic and metallic materials is possible. |
| Capacity or flow rate | 4600 [m³/h] |
| Height, single-step, up to | 70 [mFl.S.] |
| Pump speed depending on series up to | 2950 [min?¹] |
| Pipe connections | DN 32 to DN 500 |
| Maximum operating pressure | 10 to 25 bar |
| Temperature of medium conveyed | 130 [°C] |
| Normal suction up to | 8 [mW.S.] |
| Outlet side position | rotatable in steps |
| High corrosion resistance at pH | 0 to 14 |
Learn more about this product on the Habermann website here:
http://www.habermann-gmbh.de
