Website: www.wilfley.com
Check out our Wilfley pumps below…..
A7 PUMP SERIES
- APPLICATIONS – Highly corrosive liquids – meets or exceeds American Society of Mechanical Engineers (ASME B73.1)
- MATERIALS – All machineable alloys SIZE – Maximum 6 x 4 (150mm X 100mm)
- Maximum 1-1/2 X 16 (38mm X 406mm)
- HEAD – Up to 400 feet (121 m) FLOW – Up to 1000 GPM (US)
- CASE PRESSURE – Maximum 275 PSI (1896 kPa)
AG PUMP SERIES
- APPLICATIONS – Highly corrosive liquids – meets or exceeds American National Standard Institute (ANSI B73.1)
- MATERIALS – All machineable alloys Modified Teflon (Tefzel) Modified phenolic resin (W-30)
- Modified vinylester (W-35) Modified furfuryl ketone resin (W-50) Carbon Polysulfone
- SIZE – Maximum 10 X 8 {254 mm X 203 mm) Minimum 1-1/2 X 1 (38 mm X 25 mm)
- HEAD – Up to 400 feet (121 m) FLOW – Up to 3,000 GPM (US)
- CASE PRESSURE – Maximum 275 PSI (1896 kPa) SPECIAL – Steam jacketed versions are available
AF PUMP SERIES – CLOSED IMPELLER SERVICE MODELS – AF and AL
- APPLICATIONS – Highly corrosive liguids . May contain a light abrasive slurry
- MATERIALS – All machineable alloys Modified phenolic resin (W-30)
- Modified vinylester (W-35) Modified furfuryl ketone resin (W-50)
- SIZE – Maximum 18 X 14
- {457 mm X 356 mm) Minimum 1-1/4 X 1/4 (32 mm X 6.5 mm)
- HEAD – Up to 200 feet (61 m) FLOW – Up to 10,000 GPM (US)
- CASE PRESSURE – Maximum 150 PSI (1034 kPa) SPECIAL – Steam jacketed versions are available in some sizes
K PUMP – TRADITIONAL SLURRY SERVICE MODELS – K, C, KBA, L, AND XL
- APPLICATIONS – Abrasive Slurries, especially when seal and gland failures are a problem.
- Slurries containing acids can also be handled.
- MATERIALS – Stainless steels Rubber lined
- Hardened alloy irons: white iron, 27% chrome, NiHard, Maxalloy
- SIZE – Maximum 20 X 16 {508 mm X 406 mm) Minimum 2 X 1 (51 mm X 25 mm)
- HEAD – Up to 160 feet (49 m) FLOW – Up to 11,000 GPM (US) CASE PRESSURE – Maximum 100 PSI (689 kPa)
- % OF SOLID – Maximum 80% dependent on material PARTICLE SIZE – Maximum – 2″ (50 mm)
HD PUMP – EXTREME ABRASION SLURRY SERVICE
- APPLICATIONS – Heavy duty slurry High head High solids concentration High wear applications
- Large diameter runners for low RPM and long wear life
- MATERIALS – Hard metals: White iron, 27 % chrome, NiHard, Maxalloy
- SIZE- -Maximum 12 X 10 {305 mm X 254 mm) Minimum 6 X 3 (152 mm X 76 mm)
- HEAD – Up to 275 feet (84 m) FLOW – Up to 7,000 GPM (US)
- CASE PRESSURE – Maximum 150 PSI (1034 kPa) PARTICLE SIZE – Maximum – 1-1/2″ (38 mm)
ES PUMP – CORROSIVE/ABRASIVE SERVICE
- APPLICATIONS – Abrasive Slurries Corrosive slurries
- MATERIALS – Hard metals Hardened stainless steel Rubber and synthetic elastomers in some sizes
- SIZE – Maximum 18 X 16 (457 mm X 406 mm) Minimum 4 X 3 (102 mm X 76 mm)
- HEAD – Up to 300 feet (91 m) FLOW – Up to 13,000 GPM (US)
- CASE PRESSURE – Maximum 150 PSI (1034 kPa) ARTICLE SIZE – Maximum -1″ (25mm)